Optical Touch Frames Built For NEC Public Displays
G-FRAME 4020 - 4620 - 5220 Series
The GDM Touch Frames turn NEC Public Displays 4020, 4620 & 5220 into interactive screens with full touch screen functionality.
The Touch Frames are equipped with NextWindow’s unique optical touch technology - used by leading companies around the world and across a range of industries, including telecommunications, tourism, retail, real estate and public information.
With unique integration design and high-end surface finish, the G-Frame Series represent great functionality and good looks.
Highlights
-Custom made frame design for NEC Public Displays -Easy installation within minutes -High-End Color finish (Custom Colors available) -Clear glass for maximum image clarity -Accurate touch sensitivity over the entire screen -Light touch: No pressure required -Any touch method can be used: Finger, Gloved hand, Pointer -Once-only, four-point calibration. No drift
Technical Data G-FRAME 4020 - 4620 - 5220: *Technical Data applies to G-Frames, not NEC Public Displays - see own data-sheet.
Frame Surface Finish:
Full Zink Plated, Metallic Coloring or Powder Coating Multiple color options available
Construction:
Fully welded mild steel frame
Luminous Transmission:
100% without glass, >92% with glass
Aspect Ratio:
16:9 (generally)
Touch Technology:
Next Window Optical Imaging - No special surface coatings
Touch Method:
Finger, Gloved hand, or any other Pointer
Touch Activation Force:
No pressure required
Touch Accuracy:
± 2 mm (for 40” screen) over 90% of the screen USB reported touch resolution 32767 x 32767
Touch Durability:
Unlimited
Touch Response Time:
Typically 110 touches per second (9 ms) for single touch with no ambient synchronisation
Environment Temperature:
Operating:
0°C to 55°C
Storage:
-25°C to 85°C
Humidity
Operating:
10% to 90% RH, non-condensating
Storage:
10% to 90% RH, non-condensating
Power Supply:
+12 VDC, nominal (+11.5 V to +12.5 V) 250 mA rms (peaks of 1 A for 8 ms), typical at +12 VDC. Average power dissipation is 3 W. Supply must be capable of providing 500 mA minimum. Total noise and ripple requirement must be less than 100 mV for frequencies below 1 MHz, and less than 50 mV (p-p) for frequencies above 1 MHz. (As supplied, NextWindow part number 302140000. Input: 90-263 VAC 47-63 Hz. Output: +12 VDC 3.5 A)
Reporting Speed:
10 ms per coordinate set (max) Typical: 50 Hz or 60 Hz reporting rate
Touch Bezel Replacements Built For NEC Public Displays
TBR 4020 - 4620 - 5220 Series
The GDM Touch Bezel Replacements turn NEC Public Displays 4020, 4620 & 5220 into interactive screens with full multi-touch functionality. The Touch Bezel Replacements are equipped with NextWindow’s unique optical touch technology - used by leading companies around the world and across a range of industries, including telecommunications, tourism, retail, real estate and public information. With its unique integration design and high-end surface finish, the TBR series represents great functionality and the good looks.
Highlights
-Custom made bezel design for NEC Public Displays -Easy installation within minutes - 8 Steps -High-End Color finish (Custom Colors available) -Clear glass for maximum image clarity -Accurate touch sensitivity over the entire screen -Light touch: No pressure required -Any touch method can be used: Finger, Gloved hand, Pointer -Once-only, four-point calibration. No drift
Technical Data TBR 4020 - 4620 - 5220 Series *Technical Data applies to Touch Bezel Replacements [TBR], not NEC Public Displays [review NEC data-sheet].
TBR Surface Finish:
Full Zink Plated, Metallic Coloring or Powder Coating Multiple color options available
Construction:
Fully welded mild steel frame
Mounting:
Easy fixation at side mounting rivet locations of NEC LCD with 12 screws.
Touch Technology:
Next Window 2150 Optical Imaging [No special surface coatings]
Touch Method:
Finger, Gloved hand, or any other Pointer
Touch Activation Force:
No pressure required
Touch Accuracy:
± 2 mm (for 40” screen) over 90% of the screen USB reported touch resolution 32767 x 32767
Touch Calibration:
Simple four-point DriverLess calibration
Touch Durability:
Unlimited
Touch Response Time:
Typically 110 touches per second (9 ms) for single touch with no ambient synchronisation
Reporting Speed:
10 ms per coordinate set (max) Typical: 50 Hz or 60 Hz reporting rate
Luminous Transmission:
100% without glass, >92% with glass
Connectivity:
USB A-A
Interface:
USB 1.1 (full speed), HID compliant, plug-and-play compatible
Power:
+3.3V [via USB A]
ESD:
Per EN 6100-4-2 1995: Level 4. Contact discharge 8 kV, air discharge 15 kV on USB connector pins.
Environmental Conditions
Operating Temperature:
0°C to 55°C
Operating Humidity:
10% to 90% RH, non-condensating
Storage Temperature:
-25°C to 85°C
Storage Humidity:
10% to 90% RH, non-condensating
Order Information
Product Code
Product Name
Product Description
Catalog No.
Color Choice
22.101.40
TBR 4020
Touch Bezel 40" designed for NEC 4020 Product Dimensions: 945 x 576 x 61 mm
22.101.40.01 22.101.40.xx
Black Saphier Metallic others
22.101.46
TBR 4620
Touch Bezel 46" designed for NEC 4620 Product Dimensions: 1080 x 650 x 61 mm
22.101.46.01 22.101.46.xx
Black Saphier Metallic others
22.101.52
TBR 5220
Touch Bezel 52" designed for NEC 5220 Product Dimensions: 1230 x 740 x 61 mm
22.101.52.01 22.101.52.xx
Black Saphier Metallic others
*more information listed in Product Price List - please request
